Pears, pears, everywhere! Why not try your hand with this easy method for smoked pears Depending on where you’re located, you’ll have at least a few varieties of pears to select from. Rather than just enjoy these as a raw fruit, try something truly unique that will give them a kiss of wood flavoring?
Stovetop smoking is so easy and a great way to still enjoy wood-fired flavorings during the winter months, when you may not want to venture out to the grill or smoker. I’ll be highlighting Bosc pears in today’s technique. To do this technique you will need:
Fresh pears – 4 will likely fill the smoker pan one time
A Chef’s knife, paring knife, and cutting board
A cooling rack
Pears cut in half
PREPARING THE SMOKED PEARS
When I purchased my Bosc pears, I made sure that they were firm to the touch so that I would have some longevity to their use in recipes for a while. Carefully, wash each pear and then pat dry with a paper towel. I then slice each pear in half, removing the stem tip. This will give me a flat surface to smoke and cook my pears since I am using a stovetop grill pan with my process. That will allow me to form some great grill marks on the pears while they cook. The benefit to using halves of pear is I can feature larger pear cuts in a salad or dessert, highlighting the golden smoked color.
Once the pears are halved and the stems removed, I will core out the seeds and hard seed membrane with a small paring knife. Once that step is complete, I start the heat under my stovetop smoking pan.
There seems to be some legend out there that wood-fired cooking methods are all about the endless hours of tending food and fire that produce taste results that are only granted to a small percentage of committed cooks; nothing could be further from the truth. Ready for simple methods of wood flavor infusion that do not take stockpiles of wood and equipment so large, you start thinking about adding on to your house?
Wood-fired cooking includes the simplest methods of wood infusion like the current rage with hand-held food smokers or even the stovetop smoker. Kitchen gadgets that have opened the door to anyone who wants to explore the fragrant and flavorful bounty that awaits all foods and beverages. One thing that still is evolving is the concept of spices not for your food but for your equipment!
If you’ve read some of our previous articles on wood flavoring you’ll come to understand and appreciate that there is no set rule on wood-fired cooking. Oh, yes, there is plenty of science when it comes to cooking with fire or as I like to say when you combust to flavor, which is what you are accomplishing with wood for cooking. I feel more attention should be given to the actual wood products; rather than focusing on the ingredients to the foods being cooked.
Wood is an ingredient
First, wood to us IS an ingredient, one that still needs to be balanced with the other components to bring forth a food memory. As an ingredient, the easiest by far to manage for wood flavor infusion is sawdust or in our Company’s listing,Smokin’ Dust®. Compatible with all types of equipment, Smokin’ Dust®literally becomes a ‘spice’ for your equipment.
Thinking of island flavors of pineapple, coconut, and mango for a recipe? Why not add one or more of those flavorings through the wood product? Yes, using all-natural flavoring infused into ourSmokin’ Dust® is one of the quickest methods of getting the great flavor to a specific regional dish. With 15 flavor-infused options that are 100% all natural, designed for cooking, and infused in hardwood, as well as 8 natural hardwood flavors, we’ve given new meaning to the word ‘spice’ as ours can now apply to the wood product! Remember, applewood doesn’t smell or taste anything like an apple. Use our apple infused product, and you’ll experience hints of cinnamon, nutmeg, and the bite of an apple!
Why settle for a run-of-the-mill smoking sawdust product that you don’t know where it comes from? A softwood, swept from the floor, shoveled from the ground, or worse, taken from under an animal? Instead, get excited about the flavor opportunities awaiting you and your equipment when you use a smoking sawdust product from a real cooking wood company. Get excited about the opportunities out there to experiment with, whether for hot smoking, cold smoking,handheld food smoking,stovetop smoking, or even traditional LP and charcoal grilling. And get ready to experience the world through flavor aroma!
Dr. Smoke- “Smokin’ Dust is one of our most customized and versatile cooking wood product.” which is a spice for your equipment
Kiwifruit gets smoky by adding a new twist to your kiwifruit by cold smoking it to enhance its wonderful sweet flavor.
KIWIFRUIT GETS SMOKY
Kiwifruit is now in season! It’s time to use this potassium, vitamin A, C & E enriched fruit in your favorite recipes. How about doing something to up the flavor level a bit?
Packed with more vitamin C than an orange and as much potassium as a banana, Kiwifruit, more commonly called kiwi, is also a fiber powerhouse. I’m going to take this creamy fruit favorite to a new flavor level by cold smoking it.
The Ease of Hand Held Food Smoking
To do this technique, you’ll need a handheld food smoker, SmokinLicious® Minuto® Smoking Wood Chips in size 6, 8 or 10, a lighter, a sheet pan, a food bag large enough to go over your sheet pan, and a cable tie. Then gather together the number of kiwifruits you’d like to infuse with smoke vapor, and have a knife and cutting board available.
Kiwifruit Gets Smoky by Letting the Smoke In
Simply cut your kiwifruit in half to allow the smoke vapor to penetrate the fruit flesh. As kiwifruit is covered by a brown, fuzzy skin, you will need some of the fruit’s meat exposed to get real smoke flavor incorporate. Otherwise, leaving them whole won’t bring much of a smokiness to the fruit meat.
What I love the most about cold smoking with a handheld food smoker like The Smoking Gun™ Smoker, is how fast this flavoring can be done to any food, beverage, liquid, spice or herb item. After cutting me kiwifruit in half to allow for maximum penetration of the smoke vapor, I place the cut halves on a sheet pan. I then slip a food bag over the sheet pan.
Oak Hardwood Species is abundant in Our rich harvest area for the best hardwood cooking woods in the world.
THE BOLDNESS OF OAK HARDWOOD SPECIES!
New York State is home to the most varieties of Oak anywhere in the world! Currently, there are 16 native to New York State alone, with many more varieties having been brought into the state. In Central Park alone, there are 18 species of oak represented. Comprised of two subgroups – white oaks and black oaks – there is one key distinction between these groups. White oaks produce acorns that are usually sweet while black oaks produce bitter acorns. So how does this translate when using Oak wood for smoking?
At SmokinLicious®, we try very hard not to make flavor descriptors of each hardwood we manufacture into cooking wood, as we hold to the belief that there are so many factors that contribute to the reveal of the underlying wood flavonoids (i.e. temperature the wood is exposed to, other ingredients used on the food cooked over oak, moisture level of the wood, etc.). However, we do have a scale to guide the user on the boldness of flavor. Oak is at the highest end of that scale. It is the boldest flavor we offer!
Knowing that oak is a powerful flavor, I must remind you that smoke particles do not penetrate completely into the meat. In general, for meats, smoke vapor only penetrates about a 1/8” meaning the “flavor” you will decipher from the oak is actually to the outside area of the meat. Certainly, if you cook a meat until it can be shredded, you will mix the outside flavor areas with the less wood flavored inner meat and get a good balance to the smoky flavor.
Hardwood- The Boldness of Oak Hardwood Species
As I’ve tried to stress, cooking foods with a specific hardwood is the choice of the cook. I am not one to say that you can never cook a specific food with a certain hardwood. Everyone’s palate is different and tolerates different levels of sweet, sour, bitter, and salty. I will, however, remind you that bold flavors need to be balanced and this can easily be done through the other ingredients incorporated with that food item or even on that food. This will allow you to use oak wood for smoking: cold smoking say beef jerky or game jerky, hot smoking lamb, goat or beef, grilling steaks of beef or pork, stove top smoking pungent flavors like onion and garlic, and handheld cold smoking say a robust cheese.
As always, very little quantity of wood is needed to bring forward the unique qualities of the wood and Oak, with its boldness, is not an exception. If you’re in the market for a very bold flavor, then go for the black oak varieties including Pin Oak, Scarlet Oak, and Red Oak. A step down from the black oaks, the white oaks include Chestnut Oak, White Oak, Swamp Oak, and Post Oak. Either choice will bring you hardwood offering that is strong in appearance, aroma, and flavor!
I see the question asked so many times and in so many ways. What is the best wood to use for smoking? What is the best wood to use for smoking (fill in the blank with your favorite food)?
I’m going to shake things up a bit by stating there is no rule book saying a specific wood must be used with a specific food. There are, however, some basic things you should know to reduce the risks of toxicity, damage to your equipment, and overall ruining your barbecue. Use the wrong hardwood and you can bitter any food you expose to that wood’s smoke.
Package labeling. It is the key to drawing attention to a product, to reduce interest in other similar products, and to make someone buy a specific product. Let’s be honest. Not everything printed on a label necessarily provides ALL the information. Use certain words and an “implied” thought will occur.
When it comes to packaging wood for smoking and grilling purposes, there are a lot of terms floating out there that certainly can be deceiving. Let’s see if I can provide clarity on what specific terms and wording mean when it comes to purchasing wood for cooking, smoking, and grilling. SMOKING-GRILLING WOOD SELLING TERMS
WOOD SELLING TERMS:
100% Natural
The intended meaning of 100% natural implies that it has not been touched by human hands. As such, with wood, this would refer to the fact that a tree is a plant designed by nature and other than cutting the tree down, it is not modified in any way.
However, we do know that trees, like flowers, can be manipulated when it comes to their genetics. Genetically modified trees are quite common in the growth of orchard woods, especially those seeking to develop dwarf varieties or specific blossom colors or hybrids. Keep in mind, genetically modified trees will have a reduction in the lignin compound which is responsible for the flavor the wood gives when it burns and gives off smoke vapor.
Currently, it is not legal to genetically modify forest trees but there is a lot of allowances when it comes to plantation and orchard/nursery trees, which often have chemicals applied to make up for the weak lignin which makes the wood susceptible to decay and pest infestation.
Kiln-Dried
Wood that is dried in a closed chamber in which the temperature and relative humidity of the circulated air can be controlled is called “kiln drying”. There are three types of Kiln Drying methods: low-temperature drying which is below 130° F, conventional electric dehumidification drying, and conventional steam-heated drying which have temperatures up to 180° F.
For the most part, when a smoking or grilling wood product lists “kiln-dried” on the packaging, it does not state the type of method being employed. Also, many that use this term do so without providing any information on what compliance record keeping is in place to attest that they are doing what they say.
There is one company who states that they adhere to the protocol designed by the United States Department of Agriculture (USDA) but quote a core temperature and length in minutes of the heating process that is not the standard written by the USDA. Their compliance agreement is provided by the state in which the business is located, which may have a different standard in place than the USDA.
Air-Dried
The process of drying green wood by exposure to prevailing natural atmospheric conditions outdoors or in an unheated shed is known as air drying. There are three dominate Air Drying methods: open yard, shed, and forced-air shed. The first is not held in high regard as the wood is exposed to all the elements making it the longest method of depleting moisture content from the wood. The second has the addition of a roof covering to maintain a precipitation-free environment, while the third option is mostly used by traditional lumber companies as it produces quicker results meaning products can be sold quicker.
Here’s the issue when you see “Air-Dried” on package labeling of grilling and smoking woods: you don’t know what method is used and no one is saying how long the wood was air-dried for. You don’t know how old the wood is, what method of air drying was employed, how long it took to “dry” it, and you likely won’t know what moisture content is left in the wood. Remember, dry out a piece of wood too far, and it is simply firewood designed for heat output only.
Naturally Cured
This is another term that floats out on the packaging that implies it is different from air drying techniques. It is not different.
Naturally curing wood means the wood is stacked in a manner that allows air to flow around the wood pieces usually in an outdoor setting. It may be left exposed, covered with a tarp or have a roof structure overhead. Naturally curing wood for fireplace use is recommend for 365 days but there is no benchmark for the timing used to dry the wood for the use of smoking or grilling. Some suppliers will use moisture levels of 20-30% as their benchmark but 10% is a large variable in moisture when it comes to wood.
Here is the biggest challenge with a natural curing method: dry the wood too quickly and you will find cracks, splitting, honeycombing, and/or warping. Dry too slowly and the wood will stain and suffer decay. Remember, decay attracts pests as that is what they feed on. SMOKING-GRILLING WOOD SELLING TERMS
Selecting
I won’t lie to you – there are a lot of choices out there for wood. How do you go about selecting from the limited information on the packaging?
Some decisions you’ll have to make on your own: do you want to cook with bark or do you find that bark indeed fluctuates the temperature of your equipment too much? Do you want to use a kiln-dried product even if you don’t know what temperature and for how long that product was heated? Would you want to use a product that hasn’t had any heat application applied to it meaning there may be pests, larvae, mold, and spores that haven’t been eliminated by a heat process? Do you want to use a product from a supplier that provides no information on the moisture of the wood? Do you want to go with a “natural”, “air dried” product that may have been exposed to anything that could access the wood: animal feces and urine, insects, chemical contaminants from the ground or another source?
In the end, I think the selection can be easy by simply looking at the wood for purity and cleanliness, looking at the packaging for evidence of air exchange meaning its likely not completely dried out and looking at the packaging information for claims that don’t seem to match the product that is packaged inside.
Most of all, you should be able to gain valuable information from any supplier’s website on the wood they are selling to you. If not, be cautious that they may not know anything about the manufacturing process of the wood and/or what is needed in wood to qualify it as cooking ingredient. We hope that our discussion of smoking & Grilling Wood Selling Terms adds clarity to your selection process.
