We do a summer favorite WOOD FIRED GRILLED WATERMELON!
WOOD FIRED GRILLED WATERMELON BECOMES A STAR
You may have seen segments on grilling watermelon before which show slices of watermelon on a standard gas grill. Although I agree that the heat generated from the grill will produce a sweet outcome, there is no comparison to doing a grilling technique that incorporates wood for added flavor.
In this segment, I’ll show you how to grill watermelon on a grill of your choice with wood chunks for the unique combination of sweet and char flavors that only comes from grilling with wood.
Grilled Watermelon- Easy Prep
I think this is by far, the easiest preparation for the grill. All you need is a watermelon of your choosing and a grill; gas, electric or charcoal. Just 2-3 wood chunks from SmokinLicious® and about 20 minutes once you have a lit grill, and this method of bringing flavor to the standard watermelon will be complete.
As watermelon contains a lot of water, it is essential that you work with a medium heat setting on your gas grill and hot coals with a moderate flame for the charcoal grill. If using a gas grill, be sure to set up the wood chunks on just one side of the grill and allow the chunks to smolder first so there is plenty of smoke vapor. Since watermelon grills in no time at all, you want to have enough smoke vapor produced to give a great tasty outcome for both a gas grill or charcoal grill method. Electric smokers are self-contained allowing for simple dialing in about 15 minutes worth of smoking time.
For the watermelon, cut lengthwise in half and cut each half into individual slices about 1-1/2 to 2” thick. Or, you can remove all the rind and grill just the watermelon meat. Keep fire safe tongs at the ready so you can turn the watermelon slices just once as they evaporate some water and sweeten up. DO NOT leave the grill! This fruit requires a careful watch so stay put and you’ll have every piece cooked to perfection.
So Many Uses for Grilled Watermelon
You’ll see how the watermelon darkens in color, get bits of char coloring to the skin, and is less water soluble. That’s the perfect outcome. Now it’s time to think about how to use your wood flavored melon.
First, you can enjoy it as is. When I serve this naked, I just give one additional flavor such as fresh, chopped mint. But if you’re looking for a lunch or lite dinner entrée, think salad by including some baby arugula, goat cheese and a splash of balsamic vinegar. For a spicy version, sprinkle the wedges with red pepper flakes, a bit of granulated sugar, and lime zest. Wood fired watermelon also works great with other summer favorites like grape and cherry tomato, pepper slices, sugar snow peas, and cucumber. No matter how you choose to serve it, grilled watermelon with wood flavoring is going to top your list of grilled favorites.
Proving that there’s more to wood-fired cooking than just animal proteins, SmokinLicious® brings you great ideas for recipes featuring a wood-fired ingredient. Bringing you tips, techniques, recipes and the science behind the fire and smoke.
Package labeling. It is the key to drawing attention to a product, to reduce interest in other similar products, and to make someone buy a specific product. Let’s be honest. Not everything printed on a label necessarily provides ALL the information. Use certain words and an “implied” thought will occur.
When it comes to packaging wood for smoking and grilling purposes, there are a lot of terms floating out there that certainly can be deceiving. Let’s see if I can provide clarity on what specific terms and wording mean when it comes to purchasing wood for cooking, smoking, and grilling. SMOKING-GRILLING WOOD SELLING TERMS
WOOD SELLING TERMS:
100% Natural
The intended meaning of 100% natural implies that it has not been touched by human hands. As such, with wood, this would refer to the fact that a tree is a plant designed by nature and other than cutting the tree down, it is not modified in any way.
However, we do know that trees, like flowers, can be manipulated when it comes to their genetics. Genetically modified trees are quite common in the growth of orchard woods, especially those seeking to develop dwarf varieties or specific blossom colors or hybrids. Keep in mind, genetically modified trees will have a reduction in the lignin compound which is responsible for the flavor the wood gives when it burns and gives off smoke vapor.
Currently, it is not legal to genetically modify forest trees but there is a lot of allowances when it comes to plantation and orchard/nursery trees, which often have chemicals applied to make up for the weak lignin which makes the wood susceptible to decay and pest infestation.
Kiln-Dried
Wood that is dried in a closed chamber in which the temperature and relative humidity of the circulated air can be controlled is called “kiln drying”. There are three types of Kiln Drying methods: low-temperature drying which is below 130° F, conventional electric dehumidification drying, and conventional steam-heated drying which have temperatures up to 180° F.
For the most part, when a smoking or grilling wood product lists “kiln-dried” on the packaging, it does not state the type of method being employed. Also, many that use this term do so without providing any information on what compliance record keeping is in place to attest that they are doing what they say.
There is one company who states that they adhere to the protocol designed by the United States Department of Agriculture (USDA) but quote a core temperature and length in minutes of the heating process that is not the standard written by the USDA. Their compliance agreement is provided by the state in which the business is located, which may have a different standard in place than the USDA.
Air-Dried
The process of drying green wood by exposure to prevailing natural atmospheric conditions outdoors or in an unheated shed is known as air drying. There are three dominate Air Drying methods: open yard, shed, and forced-air shed. The first is not held in high regard as the wood is exposed to all the elements making it the longest method of depleting moisture content from the wood. The second has the addition of a roof covering to maintain a precipitation-free environment, while the third option is mostly used by traditional lumber companies as it produces quicker results meaning products can be sold quicker.
Here’s the issue when you see “Air-Dried” on package labeling of grilling and smoking woods: you don’t know what method is used and no one is saying how long the wood was air-dried for. You don’t know how old the wood is, what method of air drying was employed, how long it took to “dry” it, and you likely won’t know what moisture content is left in the wood. Remember, dry out a piece of wood too far, and it is simply firewood designed for heat output only.
Naturally Cured
This is another term that floats out on the packaging that implies it is different from air drying techniques. It is not different.
Naturally curing wood means the wood is stacked in a manner that allows air to flow around the wood pieces usually in an outdoor setting. It may be left exposed, covered with a tarp or have a roof structure overhead. Naturally curing wood for fireplace use is recommend for 365 days but there is no benchmark for the timing used to dry the wood for the use of smoking or grilling. Some suppliers will use moisture levels of 20-30% as their benchmark but 10% is a large variable in moisture when it comes to wood.
Here is the biggest challenge with a natural curing method: dry the wood too quickly and you will find cracks, splitting, honeycombing, and/or warping. Dry too slowly and the wood will stain and suffer decay. Remember, decay attracts pests as that is what they feed on. SMOKING-GRILLING WOOD SELLING TERMS
Selecting
I won’t lie to you – there are a lot of choices out there for wood. How do you go about selecting from the limited information on the packaging?
Some decisions you’ll have to make on your own: do you want to cook with bark or do you find that bark indeed fluctuates the temperature of your equipment too much? Do you want to use a kiln-dried product even if you don’t know what temperature and for how long that product was heated? Would you want to use a product that hasn’t had any heat application applied to it meaning there may be pests, larvae, mold, and spores that haven’t been eliminated by a heat process? Do you want to use a product from a supplier that provides no information on the moisture of the wood? Do you want to go with a “natural”, “air dried” product that may have been exposed to anything that could access the wood: animal feces and urine, insects, chemical contaminants from the ground or another source?
In the end, I think the selection can be easy by simply looking at the wood for purity and cleanliness, looking at the packaging for evidence of air exchange meaning its likely not completely dried out and looking at the packaging information for claims that don’t seem to match the product that is packaged inside.
Most of all, you should be able to gain valuable information from any supplier’s website on the wood they are selling to you. If not, be cautious that they may not know anything about the manufacturing process of the wood and/or what is needed in wood to qualify it as cooking ingredient. We hope that our discussion of smoking & Grilling Wood Selling Terms adds clarity to your selection process.
Recently, I came across a great article on the new hot trends in cold cuts and smoked meats. The article stressed how the $200 million in sales was the result of companies offering such things as chorizo, pepperoni, salami, and smoked bacon with bolder flavors and cleaner ingredients. So, why do I have a problem with this and how does it relate to food labeling?
What About the Smoke
The article went on to explain that the No. 1 trend in smoked and processed meats is products that are “uncured” or “no-nitrates added”, stating that this is due to the new health-conscious consumer. This got me thinking about smoked products in general. No one seems to be asking about the smoking process used to get that bacon hickory smoked!
If people are so sensitive to the ingredients in their foods, why haven’t we become concerned about the smoke component used for the actual process?
Food Labeling- Demand Label Changes
There are so many companies investing in the repackaging of their products to include such labels as “no-sugar-added”, “dairy-free”, and “gluten-free”. Consumers are label readers and keenly interested in how products are made, how animals are raised, how products are preserved, and the percentage of fat in the processing.
One factor in food preparation that doesn’t seem to have been included in food labeling is the actual smoking process for food products like smoked bacon, fish, or beef jerky.
Why doesn’t anyone seem concerned enough to ask what are they smoking with? Is it actual wood or the wood-flavored vapor that is used to make liquid smoke, hardly an ingredient that would be considered chemical-free?
Food Labeling- Wood Should Be a Food Ingredient
Let’s examine why wood should be looked at as a food ingredient when used for hot or cold smoking or wood-fired cooking in general.
First, not all companies selling wood products under the guise of smoking, identify what components of the tree are manufactured in the product. Nor do they give any indication if the wood used in the manufacture of products started for only the purpose of food application. To clarify this point, let’s review one common seller of wood products found on Amazon.com.
This popular choice in wood chips started as a hickory and mesquite manufacturer of log products by a single owner back in 1986. Originally, they sold logs to locals around their area. Eventually, they branched out to wood chips and wood chunks in retail packaging when BBQ became so popular.
The company was sold to a fire log company who uses recycled wood sawdust and agricultural fibers to produce fireplace log products. With the change in ownership, the company began selling other woods; pecan, post oak, and mesquite that are native to their home state of Texas, and the rest of the offerings which are brought in from other suppliers and locations. There is no bark removal, there is no separation of wood layers. Much of the product lies in open areas on the ground exposed to the southwestern sun as well as to anything else that may make contact. The product is left uncovered in outdoor areas awaiting packaging, even after it has been kiln dried which is the only reference made to any preparation of the wood.
Here is one concern with the current ownership – keep in mind, with a primary business of manufacturing charcoal and fire log products, this business was originally connected to a cedar and basswood pencil business. For those who don’t know woods, cedar and basswood are both softwoods, something that can be toxic if used for cooking food.
No Wood Regulations
There are no regulations that specifically state that you must guarantee that the wood packaged is clean, pure, and 100% of what it says it is on the label. Just about anyone can start to package wood, whether hardwood or softwood or a combination of both, as a “cooking”, “grilling”, “smoking” or “BBQ” wood. There are no regulations that it must be kiln dried or heat treated. It is a free-for-all with regard to food labeling!
There may be claims that we are label readers, but it appears when it comes to wood used for cooking, we don’t have a clue. This may be the oldest method of cooking in existence, but it certainly doesn’t have to contain the same risks as what the earliest homo sapiens endured.
The next time you see packaging that bacon, jerky, deli meat is of a smoked variety, look at the label and ask the question, “How was this smoked?” You will be amazed that little or no answers are provided. I hope you enjoyed our topic “Hot Trend” and the argument for better food labeling!
In today’s age of selling products and services, there are acronyms that are common to marketing and sales strategies. First, there is B2B which refers to business to business relationships. This means that a product or a service is sold from one business to another. An example of each would be windshield wiper fluid being sold to gas stations and attorney services to large corporations.
B2C is shorthand for business to consumer. This is selling a product or service directly to a customer that is not necessarily a business.
Now, you may automatically assume that SmokinLicious® would fall under both these sales types, and you would be right. But there is another acronym you likely aren’t familiar with: F2C.
F2C- Making a Better Connection
F2C refers to factory to consumer or more specifically, manufacturer to consumer. There are many reasons why this is a plus to both businesses and consumers doing business with a specific manufacturer. Let’s examine the major advantages from the perspective of doing business with SmokinLicious®:
Advantage #1 Details
As the manufacturer of all the products sold under the brand SmokinLicious®, we can provide the specifics on where the hardwood comes from, the age of the wood, the handling of the product, the treatment the wood is exposed to, and the details on packaging. You don’t have to wait on answers to your product questions like with a supplier who is simply a re-seller of the wood. We give answers immediately!
Advantage #2 Intimate Knowledge
When you are committed to manufacturing a specific product, you tend to know that product thoroughly. For SmokinLicious®, that equates to us knowing not only about wood fired cooking techniques like hot smoking, ember cooking, and cold smoking but we know the science behind hardwood; molecular biology of the wood as well as for combustion. We know why smoke gives flavor and how to respect and control it.
Advantage #3 Availability
We aren’t simply selling a product to move it out of inventory. As a manufacturer, we are committed to answering questions whether on email, via phone, or social media platforms. No, we don’t operate the phones 24/7. But we do get back to anyone who contacts us, usually within 24 hours. We are available to everyone!
Advantage #4 Passion
Sometimes I feel the word “passion” is overused but that word really does describe the people who make up the SmokinLicious® Team. We are passionate about cooking with fire and the smoke it produces. We simply love to offer our perspective on cooking with wood. Remember, just because someone sells a specific product doesn’t mean it was a dream of theirs. It simply may be the “thing” to do with no real commitment. Who wants to commit to that type of supplier!
Advantage #5 Skilled
We have a test kitchen/patio and we use it – all the time! That’s the only way you can know all the different applications for the product we manufacture and sell. We possess the skills to guide you on what might be causing bitter flavors, poor color, equipment failures, and so much more. Plus, we offer daily postings on recipes, tips, techniques, and the science behind cooking with fire and smoke.
Advantage #6 Global
We can be everywhere because we know our commodity and the regulations that relate to our products. We don’t cut corners because we are as concerned about our environment and forests as the agricultural agencies around the world. You won’t ever need to worry about having your supply cut off because a regulation or law wasn’t followed.
Advantage #7 Exclusivity
You’re purchasing smoking wood to cook with. That means, food is exposed to the wood’s components. Don’t you want assurance that it’s clean? We only sell hardwoods for cooking and culinary use! That’s it! We don’t take waste product from some other wood process and sell it off under a new label or brand. We don’t buy woods from anyone who can’t document on paper where the smoker wood is from and if exposure to chemicals is possible. SmokinLicious® is exclusively a culinary wood product!
These are just some of the advantages to working directly with and purchasing directly from a manufacturer, or F2C. When you want assurances that any question you have can be answered, that any product need can be met, that your equipment will be protected, then seek a direct manufacturer first and eliminate a middle man that may only be in it for dollars and cents. Or one day you could simply find they’re no longer in business or they no longer can ship product throughout North America or other continents, leaving your Company with a big problem.
Building the perfect fire for cooking! Our chimney starter full of flaming hot charcoal being poured into our kettle grill.
In Part I of our series on lighting an outdoor fire for cooking, I addressed fire production for the outdoor fireplace or fire pit cook, known as open fire appliances. In Part II, I’ll address the needs for kettle, drum and box grills’ fire set up.
The Wood-Fired Environment
There are many choices in equipment for working with a wood fire but each has different material components that determines how much work would be involved to cook on the unit. Here is the primary point when you’re selecting equipment for live fire: how will you cook on that equipment?
If your plans are to always do indirect cooking whereby the source of heat (fire, coals) will be on one side and you will cook on the non-heat side (in my opinion, the preferred method for all cooking), then know that most any equipment selected will work. However, the time for the equipment to heat up may play a factor, as the heating time is directly related to the insulation of the grill. Plus the amount of radiant heat it can hold.
If a unit is manufactured from heavy metal, brick, clay, or ceramic housing, then it will perform exceptionally by giving radiant and retained heat. Why is that important? Because producing retained and radiant heat means less fuel consumption and even cooking results.
The Kettle Grill
For thinner material grills like the traditional kettle grill which are very popular, low cost, and preferred
by many, you can compensate for the potential heat loss and improve efficiency by adding fire bricks to the walls and floor of the grill. You will simply start your live fire directly on the fire bricks rather than the charcoal grate. Fire bricks will work well in any grill that could improve on its insulation.
Drum/Barrel Grill
The overall cooking space in a drum/barrel grill is larger than that of a kettle grill. However, just like any metal material, there are different grades so quality can be variable. Same rule applies to these grills: if the insulation is not great, add fire brick to improve the performance.
Box Grills
These units are traditionally made of high heat metal with a deep, metal charcoal pan that includes grid and vents. A grilling grate is suspended above and there often is a lid to the unit.
Fire Set Up
As I’ve stressed before, a good fire needs 3 elements: fuel (wood, charcoal), oxygen (air intake vents), and heat. As with any fire cooking, a small, hot fire is ideal.
Double Filet Wood Chunk
To start your fire in one of these pieces of equipment, first open the air intake vents at the base of the charcoal firebox area. This will ensure that oxygen can stimulate the start of the fire. Since this is an enclosed firebox area, the size of the wood pieces may need to be adjusted from what you would commonly use in a fireplace or fire pit/fire ring.
I like to use the log cabin method of starting a fire with this equipment. Lay 2 longer pieces of hardwood parallel to each other with about 3 inches of air space between them. Lay 2 more hardwood pieces on top perpendicular to the first pieces. Place the last 2 in position to match the base woods’ alignment. In the center, add a pile of tinder which can be hardwood chips, pine cones, even newspaper if need. Again, I like to use wood in its natural form as much as possible. Pile some kindling size wood pieces on top of the tinder pile. You can drizzle vegetable oil on top of the kindling and tinder to assist with ignition which proves helpful if you plan to light with a long wooden match. I prefer to lite my fire using a MAP torch.
Don’t Rush It
It is imperative that you allow the fire to go through the full stages of combustion before you introduce foods to the cooking grate. Too much flame and smoke will ruin the foods. The ideal is to wait until the fire burns down to glowing embers. If your equipment has the room in the firebox, rake or shovel some of the hot embers to one side and add just a small quantity of additional hardwood to keep the heat steady. The rest of the hot embers are what will be used to cook with.
Position the foods based on the heat needed for the cooking. Meats will require more of the heat while vegetables and one pot dishes will take the medium to low heat. An infrared thermometer will aide with knowing heat levels in your equipment or you can use the hand test: hold your hand over the coals the distance your foods will be. If you can only hold your hand for a count of 2 seconds before you need to pull it away, that is high heat. 3-4 seconds is medium-high, 5-6 seconds is medium and 7-8 seconds is low heat.
I hope you gained some new information on lighting a fire. Whether you plan to cook over/in your kettle, barrel or box grill. Leave us a comment and subscribe so you don’t miss anything concerning wood fired cooking, flavors, and the science behind the fire.
Dr Smoke- “The key to any success in grilling and smoking outdoors is building the fire with the proper materials and patience to develop the right base before you attempt to cook the food.”
The grand ole tree beech hardwood adds a very European flavor to smoked foods, especially sausage style products.
With 10-13 Beech varieties available throughout the world, this is a hardwood tree that can age to some 300 years. Visually, they are quite impressive often with distinct “root feet” and gray, smooth bark. The scientific name is Fagus Grandifolia but in North America, we know this as American Beech.
Attention Women Chefs: The Woman’s guide to manning the grill!
Part one of the Audio:
Part two of the Audio:
It’s long been the equipment associated with the guys. Perhaps it’s due to the primal start of cooking over the live fire which initially was a man’s skill. Hunt the animal and cook it on fire and hot coals.
Recently, the trend has begun to turn around in favor of more women chefs cooking components of a meal on the grill. In fact, it’s not just the traditional LP/gas grill but charcoal grills as well, as women chefs take their new recipe and technique finds out of the traditional indoor kitchen and to the outdoors.
Just Because It’s Outside Doesn’t Change The Purpose
There is no question that outdoor grilling equipment has evolved into something of a fantasy. We now have choices beyond the standard LP, natural gas, charcoal, and electric grills. Many brands are now featuring dual fuel cooking, meaning they may have gas or electric assist but use wood and/or charcoal for heat and flavor!
What does this mean for the ladies who want to do the more outdoor cooking on the grill?
Versatility! It is so easy to cook an entire meal on the grill without it taking several hours or more.
Accessorize!
The key to ensuring that an entire meal can be cooked on the grill is to have the right tools and that includes some accessory items. Let’s look at each recommended item and answer the question why it’s important to the woman’s full meal grill event.
#1 Grill Grate Accessories:
First up, the grill pan, grill basket or grill topper. These are perfect for vegetables and fruits making it so easy to ensure that the food doesn’t stick to the grill grates and that every piece gets cooked evenly. Plus, since many grills are now sold with a side burner, you can always steam or parboil tougher vegetables first, then transfer to the grill pan/basket/topper. Or, use that side burner to make rice for a healthy starch side. Don’t have a side burner on your grill or are using a charcoal grill? Then buy a butane burner! These are so inexpensive yet give you another cooking option to get everything ready at the same time.
#2 Easy Charcoal Lighting:
If you don’t know what a chimney starter is, time to learn. The charcoal chimney starter is the best way to light a charcoal fire. Although these traditionally use newspaper at the bottom (for ignition) and load charcoal chunks (can be briquettes or lump) into the body of the unit, I take a simple method of lighting my chimney. I load with my favorite charcoal and use a butane torch under the unit to light – no newspaper needed. This allows me to leave the butane on auto fire for a few minutes to ensure the lower coals are lit. Simply pull the torch out, shake the chimney while wearing fire gloves, and return to a heat safe surface until the top coals turn white-gray. Oh, and you can always light the chimney off that side burner too!
#3 Purchase 2 Thermometers
Stop guessing at when things are done! You need to invest in 2 quality thermometers; one for the grill/smoker and one instant-read for the food. Be sure the thermometers you invest in can take a reading in 5 seconds or less, have at least a 4-inch probe for thicker cuts of meat, and have cables that are durable (if you don’t go with a wireless), especially for equipment thermometers that are placed through venting holes or under lids.
#4 Silicone
Anything made from silicone will become a lifesaver at the grill. Silicone pot handles covers, spatulas, heat resistant tongs – you get the idea. This material can handle the high heat of grills so stock up on those items you’ll need and use the most. Suggestions? Tongs, pot handle covers, spatulas, spoons, mat.
Diversify!
Grilling does not necessarily mean you must put all foods on the grill grates. Use high heat cookware to help you out. Think cast iron or high heat clay and enamels meant for the grill. These are perfect for starting one-pot wonders like legumes, pasta dishes, even sauces. With a roomy enough grill, you can fit many different items – grill pan/basket, Dutch oven, and rib racks. Don’t forget most grills come equipped with a lower and upper grill rack so more fragile items that need less heat can go to the top. Here are some tips on food to cooking equipment match:
Tip #1: Cast Iron and Charcoal
Cast iron is, without question, the best material for cooking directly in the coals. Here’s a tip – if you have an outdoor fireplace or even a fire pit that uses wood, you can do this method of cooking by placing your cast iron skillet or Dutch oven directly in the coals. Keep in mind, I said coals, not flame. Coals have a very high BTU rating and can cook foods within cast iron as if they are in the oven. Just be sure to pack the hot coals around the cast iron after placing the pan in the coal bed. Perfect items to try: vegetable medley, roasted potato, curry dishes, au gratin dishes.
Tip #2: Cast Iron and LP/Gas Grill
Just like having the side burner on a grill, cast iron on the grill is like having an extra pot on the stove. Cast iron comes in lots of sizes and cookware type: saucepan, skillet, Dutch oven. Anything you would traditionally make in cookware on the stove can be done on the grill. The key is to ensure that you have this on a section of the grill that isn’t set to “high”, as cast iron holds heat.
Tip #3: The Upper Grill Rack
Though small in overall size, the upper grill rack is designed for those fragile items or for items that require simple warming. Think melting butter for vegetables, heating sauces, warming bread and rolls. Use it! It can be of great value to keep you from needing anything indoors.
Tip #4: The Rotisserie
If you have a grill with a rotisserie, use it! Keep in mind, as that item turns on that rod, the meat or poultry renders some fantastic juices. Catch them! Put a high heat pan under the food item with some great vegetables and use the drippings to add superb flavor to the cooking process.
Women Chefs- “Flavor It Up!”
Now, let’s be clear! Unless you’ve invested in a dual fuel or hybrid grill, one that allows you to use charcoal and/or smoking wood, most standard LP grills are just that: grills not smokers. If you don’t have a hybrid but want to get some smoking woods flavoring to your foods, then start thinking of adding charcoal and wood chunks! Yes, you heard me right. WoodChunks vs. woodchips which was the product of choice for years with LP grills.
Why Smoking Wood Chunks?
Most grills today are designed with covers for the gas burners to diffuse the heat more evenly. They go by a lot of names: heat distributors, flame tamers, heat plates, burner shields, flavorizer bars. The addition to the traditional LP grill is the reason why you can use smoking wood chunks. Simply place a few small wood chunks under the grill grate right on top of the heat diffuser. Be sure you only put chunks on a burner you will ignite. Replace the grill grate and you’re ready to go! And, yes, you will get real wood smoke vapor to flavor whatever you’re cooking on the grill. I promise!
Final Points Especially for Our Women Chefs
“Manning” the grill is no different than planning a meal in your conventional kitchen. Pick out the components of the meal and decide what needs to cook were on the grill: directly on the grate, on the rotisserie, in cast iron, on the coals. If doing a meat, be sure to marinate 6 hours or best, overnight, to ensure a moist outcome and to reduce cooking time.
Have everything prepped including the grilling tools you will need and this is a walk in the park for all women chefs planning daily meals for the family. The best part, you can enjoy more of those great warm days and not sweat in the confines of the hot summer kitchen!
For our women chefs, check out these articles for more reading on grilling and food smoking tips & techniques:
Dr. Smoke- “More and more, women chefs are taking up the art and science of grilling and smoking food! We’ve developed this specially prepared guide to offer helpful tips to the ladies!”
Alder wood the safe bet for cooking wood- little in flavor!
ALDER WOOD THE SAFE BET!
Alder
I’m often asked if there is any hardwood that is a safe bet to use with any food item and equipment. One that won’t be too strong if over applied or hurt the equipment if too much wood is used. Well, as you’ve heard me mentioned before, we don’t provide descriptors of the woods we manufacture as we believe there are too many variables that affect the overall flavor of the hardwood. Instead, we offer a rating of our woods based on how bold they are. On the low end of that rating scale? Alder wood the safe bet.
Family of Trees- Alder Wood the Safe Bet
First, let me state that Alder is part of the Birch family of hardwood. It is a genus that is a flowering plant. Around the world, there are 35 species of both the tree and shrub form. Yes, that is correct. Alder is not always a tree but can be a tall growing shrub. In New York State, we have roughly 13 varieties with our Alder referred to as Eastern Alder. On the density side, this is a lighter hardwood and thus, it does not hold moisture long. This makes this hardwood ideal for very specific cooking applications.
Alder is very light in its stimulating flavor compounds. I’m sure you’ve read that Alder is ideal for fish but there are missed opportunities if you don’t go beyond the fish category. Given there are so many options to infuse smoke vapor, this can be a great wood choice when using a handheld food smoker or even a stove stop smoker or cold smoke generator. Contemplating chocolate, cheese, or fruits? Alder can be a perfect match.
Caution- Alder Wood the Safe Bet
Here’s my one caution. If you are planning to incorporate bolder ingredients with your food item, then alder may not be the first choice. Lots of bacon, chili or cayenne pepper – these will mask the flavor of the Alder wood. Instead opt for foods that have lighter ingredients like herbs, citrus, dairy components.
As mentioned, Alder or Birch will start with a moisture level that is higher but due to the composition of its cell structures, the water will evaporate faster in the hardwood. Using it on an LP grill or in a charcoal unit may require quicker replenishment than another denser hardwood so extra supply is always recommended.
Blending- Alder Wood the Safe Bet
Don’t forget, blending Alder with another hardwood works well too so if you do want a spicier kick to your ingredients, feel free to add Alder with a bolder wood like hickory, beech or oak.
The best part is always in the experimentation so have fun working with this hardwood that I call the safety net – it won’t let you fall flat if you select it for your smoke infusion.
Dr. Smoke Alder wood the safe bet when it comes to wood smoking with a lite taste
This is the The Smokinlicious® Story and the birth of the cleanest USA manufactured hardwoods specifically for cooking.
We all have dreams. I can seriously tell you that one of mine did not include owning a cooking wood company. It just happened. The short story is, my husband and co-founder of SmokinLicious®, agreed to take over a wood products business that required a more skilled leader. For two years, I let him tackle this venture alone until his vision saw more potential.
Just a few years ahead of this, we had another dream of owning a lake property. We managed to make that dream a reality in 1999 when we lucked out finding our ideal property. It needed a lot of work. A LOT! We jumped off the cliff that year and continued working on this project for the next 12 years adding various out buildings. The fourth building to be built would turn out to be one of the most used and bring to life our cooking wood company – our outdoor kitchen.
The Outdoors Brings Clarity- The SMOKINLICIOUS® Story
We brought in larch logs to stand majestically as pillars on the countertop surround. We brought in stone from a local quarry and built a beautiful outdoor fireplace with an elevated hearth. And we outfitted the kitchen with a small refrigerator, sink, prep area, and loads of under counter cabinets. When it was done, we began cooking and creating and dreaming some more. You see, we are blessed with mountains all around us that harbor the best hardwoods for cooking. And we owned a wood company!
Here’s where life got interesting.
We would entertain friends and family, always cooking in that outdoor kitchen when we could. The questions started pouring in! “What did you do to these short ribs? I’ve never tasted anything so good! How is it possible that my 7-year old, who won’t ever eat my steaks, is asking for 3rd helpings of yours?”
Have you ever experienced one of those moments? I call it karma.
We had plentiful hardwoods so we never paid attention to what other people had for cooking supply. Until that moment.
Make It Like No Other- The SMOKINLICIOUS® Story
We scoured the stores and online sites looking at what was available for cooking wood. We didn’t like what we saw. The packaged wood looked dry, dirty, inconsistent in sizing, loaded with bark, not something enticing to cook with. And that was our moment.
We knew we could produce a better product line then what was currently available. We made our list of issues we could see with the current product offerings. Then we launched into our plan.
If you’re like me and you understand that you control your own fortune in life, then you’ll understand that I could see what I wanted in this product, I believed I could make this product and company a reality. I just didn’t know the how. That is generally the pattern for all success in business.
Belief Becomes Reality- The SMOKINLICIOUS® Story
SmokinLicious® started business by providing a handful of products to meet the initial needs of those who wanted to smoke with hardwood. We tested our products on the competitive barbecue circuit throughout North America, we studied the equipment that most competitors and home users used, and we studied the wood. Over the past 13 years, we’ve been listening to our customer’s comments, listening to the needs of our potential and existing commercial customers, visiting commercial smokehouse operations, and analyzing what’s missing in the market. We’ve gone from one size of wood chips to over eight options, three offerings of wood chunks, five sizes of heartwood logs, and over 15 flavors of our Smokin’ Dust® product, making SmokinLicious® the most innovative cooking wood supplier who also happens to manufacture every product.
If the equipment to make our dream real didn’t exist, we made it. If writing how to guides didn’t prove enough, we offered videos. Additionally, if photos couldn’t prove the differences in our products from others, then we offered up molecular analysis.
This is The Smokinlicious® Story or at least our story to this point. There is so much more to come. Join us and experience a rebirth when it comes to wood fired cooking techniques and get the perfect partner for your needs. You can be part of the rest of The Smokinlicious® Story!
The Kettle Grill
